24x36 Monitor LCD Open Frame

30 -- 65W Max.

Features:
• 100 --240VAC Universal Input
Short Circuit / Over Voltage / Over Current
• MTBF > 100,000 hours

HF1065 X

X: Output range

NOTE:

1: Ripple & Noise is mEAsured by using 20MHz bandwidth limited oscilloscope and terminated EAch output with a 0.1uF ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line.

2: Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.

3: Max. Power (W) >=Vo x Io

Electrical Specification

INPUT

•Input Range                100 to 240 VAC

•Frequency                   50 to 60Hz

•Input Current               <= 1.5A

•Inrush Current           60A/100VAC, 120A/230VAC

• Hold Up Time             8.3ms min.

•Turn On Time               <= 3s

OUTPUT

•Over Current Protection           Auto Recovery

•Short Circuit Protection            Auto Recovery

•Over Voltage Protection           Auto Recovery

ENVIRONMENTAL

•  Operating Temperature          0 to 50°C

•  Storage Temperature             -20 to 85°C

• Operation Humidity                 10% to 90%

• Storage Humidity                     5% to 95%

SAFETY

• Certified for the whole series: CCC(Under Proceeding)

Mechanical Specification

• Case Size: L101.6 x W50.8 x H37(mm)

• Input Connector: JST VH series or Euivalent

• Output Connector: JST VH series or Euivalent

• Weight: 200 +/-10g

Product Introduction

An LCD open frame monitor is a type of flat panel display that uses liquid crystal display (LCD) technology to produce images. LCD open frame monitors are used in a variety of applications, including computer monitors, televisions, and mobile phones.

An LCD open frame monitor typically consists of two pieces of glass that sandwich a thin layer of liquid crystals. When electrical current is applied to the liquid crystals, they align themselves so that light can pass through them or block it depending on the polarization of the crystals. This allows for the creation of images on the LCD open frame monitor.

LCD open frame monitors have many advantages over other types of displays, including their compact size, low power consumption, and high image quality. Additionally, LCD open frame monitors do not suffer from screen burn-in like some older display technologies.

Product Advantage

When it comes to monitors, there are a lot of options on the market. But if you're looking for a quality product that won't break the bank, then you should definitely check out the x Monitor LCD Open Frame. Here are just some of the reasons why this product is a great choice:

-It's very affordable. You won't have to spend a lot of money to get a great quality product.

-The design is sleek and modern. It will look great in any home or office setting.

-It's easy to set up and use. You won't have any trouble getting it up and running.

If you're looking for a high-quality monitor that won't cost a fortune, then the x Monitor LCD Open Frame is definitely worth considering.

Product Uses

An LCD open frame monitor is a device that helps display information in a clear and concise manner. It is most commonly used in industrial, commercial, and automotive settings where space is limited and there is a need for clear and consistent visual displays.