Lcd Monitor High Production Outdoor Open Frame

5W ~ 10W Max.

Features:
• 100 --240VAC Universal Input
• Protection:
Short Circuit / Over Voltage / Over Current
• MTBF > 100,000 hours

HF1010 X

X: Output range

1.  Ripple & Noise is mEAsured by using 20MHz bandwidth limited oscilloscope and terminated EAch output with a 0.1uF

 ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line.

2. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.

3. Max. Power (W) >=Vo x Io

Electrical Specification

INPUT

•Input Range          100 to 240VAC

•Frequency             50 to 60Hz

•Input Current         <=1.5A

•Inrush Current       60A/100VAC, 120A/230VAC

• Hold Up Time       8.3ms min.

•Turn On Time         <= 3s

OUTPUT

•Over Current Protection       Auto Recovery

•Short Circuit Protection        Auto Recovery

•Over Voltage Protection       Auto Recovery

ENVIRONMENTAL

• Operating Temperature       0 to 50°C

• Storage Temperature          -20 to 85°C

• Operation Humidity             10% to 90%

• Storage Humidity                 5% to 95%

SAFETY

• Certified for the whole series: EN60950 CCC

Mechanical Specification

• Unit Size: L35 x W18.7 x H18.2(mm)

• DC Input: Cigarette Plug

• Weight: 200+/-10g

Product Introduction

An LCD monitor is a type of flat panel display that uses thin-film transistor technology to improve image quality. This type of monitor is often used in computers, laptops, and other devices where space is limited. One advantage of an LCD monitor over a CRT monitor is that it does not use as much energy.

LCD monitors come in a variety of sizes, from small screens that are only a few inches wide to large screens that are over two feet wide. The resolution of an LCD monitor is typically higher than that of a CRT monitor, which means that images will be sharper and more detailed.

Product Advantage

An LCD monitor is a great choice for high production outdoor open frame applications. LCD monitors offer many advantages over traditional CRT monitors, including:

1. Space Savings - LCD monitors are much thinner and lighter than CRT monitors, so they take up less space. This is especially important in outdoor applications where every square inch counts.

2. Power Efficiency - LCD monitors use much less power than CRT monitors, which means lower operating costs.

3. Image Quality - LCDs provide a clearer, sharper image than CRTs. This is especially important in outdoor applications where sunlight can wash out the image on a CRT monitor.

4. Ruggedness - LCD monitors are more rugged and durable than CRT monitors, so they can withstand the rigors of an outdoor environment better.

Product Uses

LCD monitors are widely used in a variety of settings, including homes, offices, and public places. They offer a number of advantages over traditional CRT monitors, including a thinner profile, lower power consumption, and less screen glare. LCD monitors are also more durable than CRTs, making them a good choice for use in high-traffic areas.